celexon 4K Pro MWHT Premium Plus Reference Screen 92" Electric Tensioned Motorised Screen

celexon 4K Pro MWHT Premium Plus: the colour-neutral reference fabric for the calibrated home cinema

The 4K Pro MWHT Premium Plus is celexon's motorised tensioned screen with a matte white reference fabric and a 203 × 114 cm viewable area (92", 16:9). It is aimed at home cinema enthusiasts who expect the most neutral image reproduction possible: the ISF-certified fabric shows colours and brightness unaltered, without any colour cast, and preserves the fine detail of modern projectors. A side cable tensioning system keeps the surface perfectly flat at all times, and a quiet tubular motor extends and retracts it at the push of a button.

Key benefits at a glance

• Colour-neutral reference image: The matte white 4K Pro MWHT fabric with gain 1.0 reproduces colours and brightness faithfully, exactly as the projector delivers them. Ideal for a calibrated projector.
• ISF-certified colour reproduction: The screen fabric is officially ISF-certified and thus tested for true-to-life reproduction without artificial contrast or colour shifts.
• Ready for 4K and 8K: The fine fabric texture reproduces even the highest-resolution content without visible screen grain – the resolution itself comes from your projector.
• With almost any front projector: The matte white fabric works well with lamp, LED, single, dual and triple laser projectors across all common throw distances, with a wide viewing angle of up to 160°.
• Premium Plus technology, all included: tensioned flatness and spiral roller, quiet tubular motor below 50 dB, plus radio and infrared remote control and USB wireless trigger as standard.

Is this screen the right choice?

• Yes, ideal for home cinema and especially for calibrated projectors that are meant to reproduce the image faithfully.
• Yes, with almost any conventional front projector, whether lamp, LED, single, dual or triple laser: the matte white fabric with gain 1.0 works well with every projector technology and across all common throw distances.
• Not ideal if you project in a bright room with a lot of ambient light and want to improve the black level further: the celexon DARKVISION (ALR) or celexon GREYVISION (contrast grey) contrast screens are even better suited to this.
• Not suitable if your projector is a laser TV or ultra short throw model: it projects very steeply from below and should be used with a laser TV/CLR screen with an angle-selective microstructure.

Do you have questions or need help choosing? Our projector specialists will advise you personally and find the right screen with you. Get in touch →

Picture quality: matte white reference fabric with gain 1.0

If you want a genuine white projection fabric, the 4K Pro MWHT is one of the highest-quality matte white fabrics in the range. Three things make the difference: an exactly neutral, ISF-tested white balance; a surface structure only around 1 micrometres fine, which shows no visible texture and reproduces even 4K and 8K content without distracting screen grain; and a wide viewing angle of up to 160°, which keeps the image evenly bright even for viewers sitting off to the side.

A matte white fabric reflects light diffusely in all directions and reproduces it unchanged, but does not actively suppress stray light – that is what contrast and ALR screens are built for. How vivid the image looks in ambient light therefore depends mainly on the brightness of your projector and how well the room is darkened; with good light control in the room, the MWHT fully delivers its true-to-colour reproduction.

Compared with projecting onto a bare wall, you gain noticeably in picture quality: instead of projecting onto textured plaster that is rarely truly neutral white, you project onto a smooth, exactly white special surface that preserves sharpness and colour accuracy. The black masking all the way round provides a clean, razor-sharp image edge and makes the dark areas of the picture appear subjectively deeper thanks to the black frame.

Premium Plus mechanism: permanently flat and quiet

The 4K Pro MWHT uses the high-quality chassis of the Premium Plus series. A precisely tuned tension cable system keeps the projection surface perfectly flat at all times, even with large diagonals. A generously sized helical roller rolls up the fabric without streaks or pressure marks, the spring-mounted bottom bar retracts smoothly and flush into the housing, and a quiet quality tubular motor with silent soft start and stop ensures particularly smooth operation. The closed, matte white aluminium housing in a simple square design blends discreetly into living rooms and home cinemas and protects the retracted fabric from dust.

Will the 4K Pro MWHT Premium Plus fit your room? Dimensions and planning

Important before you buy: a motorised screen needs more space than just the image width. The key details at a glance:

The key points for planning:

• Black top drop: With the 16:9 format, there is a black top drop of around 50 cm at the top between the screen housing and the projection surface. It brings the projection surface down to a comfortable viewing height, so the image doesn't start directly below the ceiling. Allow for it when planning the mounting height; it can only be shortened by a few centimetres. Always extend the fabric fully if possible: its own weight pulls the surface flat and prevents waves.
• Seating distance: With an image width of 203 cm, a comfortable seating distance for most viewers is around 3–4 m.
• Mounting: on the wall or ceiling as required; matching mounting brackets, ceiling hangers and an adjustment tool are included. Place the brackets as close to the end caps as possible for the smoothest operation; installation by two people recommended.
• Power connection: The cable outlet is at the rear near the left end cap; plan the power supply there.
• Tip: Mark out the dimensions on the wall with masking tape beforehand – you'll see straight away whether the image size and lower image edge are right.

Exactly where the projector needs to stand is the trickiest question. Tell us your model and we will plan the placement with you. Have your projector placement calculated →

Operation and control: everything included

The 4K Pro MWHT comes with complete control built in. RF and infrared receivers are built into the housing, and the matching remote controls are included. Using the supplied USB wireless trigger, the screen extends fully automatically as soon as the projector starts and retracts again after it is switched off, so one remote control is all you need. You can fine-tune the lower stop point of the screen in small steps via the remote control (up to ±15 cm) to match the image height exactly to your furniture. If you wish, you can also integrate the screen into an AV receiver, smart home or home automation system via the RJ45 interface (RS232/RS485) or potential-free contacts.

Applications

Discerning home cinema: The 4K Pro MWHT shows its strengths in a home cinema where natural colours and the finest details matter. If you align or calibrate your projector, the matte white fabric puts exactly the image the source delivers onto the wall – from films and series to 4K Blu-ray and gaming.

Demanding presentation and media rooms: In conference, training or media rooms too, the matte white fabric delivers a bright, true-to-colour image with a wide viewing angle – well suited wherever content needs to look clear and natural to many viewers. As a 16:9 surface, it matches the aspect ratio of 4K/UHD content without black borders, making it the ideal partner for a modern 4K projector.

How to keep your screen looking good for a long time

After the film, the screen retracts back into the housing, where it is protected from dust and touch. The PVC fabric surface is sensitive to temperature: do not install the screen in direct sunlight, directly in front of a window or right next to a radiator or air conditioner. After delivery, the fabric should be allowed to acclimatise for about two hours (longer after a sharp change in temperature). Clean only with a dry or slightly damp soft cloth, never with alcohol or cleaning agents.

In the box

• celexon 4K Pro MWHT Premium Plus Reference Screen 203 x 114 cm
• Radio remote control (RF) and infrared remote control (IR)
• USB wireless trigger (factory-paired)
• 2× mounting brackets for wall and ceiling, 2× eyelets for ceiling suspension
• Fixing hardware and adjustment tool (4 mm)
• Operating instructions

Shipping note: your screen is usually delivered separately by courier or, for large formats, by freight forwarder.

Have you thought of everything?

• Matching projector: you'll find the full range among our smart projectors and home cinema projectors.
• Different size or version? You will find the complete range under celexon screens.
• Signal to the projector: the matching HDMI cable in the right length to connect the source and projector.
• Mount your projector securely: the matching projector ceiling mount holds the projector firmly in position.

Frequently asked questions about the celexon 4K Pro MWHT Premium Plus

How bright should my projector be?
That depends mainly on your room: the more stray light from windows or lighting, the more brightness the projector needs. If the room can be darkened well with blinds or curtains, or you watch in the dark anyway, around 1,000 lumens can be enough depending on the image size; with a lot of ambient light, considerably more is advisable. What always matters is that the projector is noticeably brighter than the stray light in the room. Because this depends heavily on the specific application, we'll be happy to work out the right brightness with you. Questions about projector brightness? →

Why does the 4K Pro MWHT have gain 1.0 and not more?
Gain 1.0 means the fabric neither amplifies nor absorbs light, but reproduces exactly what the projector delivers. A higher gain (e.g. 1.2) makes the image slightly brighter from the front, but narrows the viewing angle and can lead to uneven illumination (hot spot) and slight colour shifts. For neutral reproduction with a wide viewing angle, gain 1.0 is the deliberate choice.

Does the 4K Pro MWHT work with triple laser projectors?
Yes. The matte white fabric reflects diffusely and has no reflective contrast coating, so it reproduces the image from lamp, LED, single, dual and triple laser projectors evenly. If you use an ultra short throw or laser TV model, however, you need a CLR screen.

Is the MWHT also suitable for a bright room?
A matte white fabric reproduces the projector's light neutrally; with the usual light control in a living room or home cinema, it is a very good all-rounder. If you mainly project in daylight or bright rooms and want to improve the black level further, the celexon DARKVISION (ALR) or celexon GREYVISION (grey) contrast screens are the specialist choice.

Can I use the screen in the garden or outdoors?
No. The 4K Pro MWHT is permanently mounted, needs a power connection and is made for indoor use, not for permanent outdoor use. For outdoor use, an inflatable outdoor screen such as the celexon INF Professional or a portable screen is suitable.

Planning a complete home cinema with projector, screen, mount and control? Our experts will put together the right complete system for you. Get expert advice →