celexon CLR Screen 100" for Ultra Short Throw Projectors 220x124cm

The CLR (Ceiling Light rejecting) framed screen is a particularly high-contrast screen that has been specially optimized for ultra-short throw (UST) projectors.

It combines the benefits of modern displays with the size of a projection screen.

A special fabric for "reflective" projection screens offers unparalleled contrast, black levels, brightness, and vivid colors in daylight or ambient light. With these features, dreams come true:

The projection screen becomes a replacement for the television!

In short:

• high-quality finished, matte black aluminum frame
• very “slim display design” - only 12mm frame visible around
• Fabric type: celexon CLR UST with 0.4 gain at 140° viewing angle – multi-layer PET fabric with light-reflecting coating
• fully suitable for 4K UHD, Active 3D suitable
• increases the in-picture contrast up to 100x compared to matte white standard fabrics
• specially optimized and only suitable for ultra-short throw projectors
• waterproof - thus wipeable with a damp cloth, anti-mold coating
• permanently perfectly tensioned fabric, thanks to the rear spring tensioning system
• simple, classic mounting of the frame (screwed L-bracket plug-in system)
• simple wall mounting, can be shifted sideways later
• Outer dimensions of the frame: 268.1 x 151.8 cm
• REACH, RoHS, free from formaldehyde & toluene

Great color values from every viewing angle

celexon's HomeCinema CLR-UST achieves excellent color performance and covers 99% of the color space measured by the Image Science Foundation (ISF).

The 140° viewing angle is extremely wide for this type of fabric, and the 0.4 gain (measured and validated by the "Cinema and Educational Quality Control Center") ensures impressive perceived brightness, black levels, and contrast values through the special grouping of incident light and reflection towards the viewer.

This makes the CLR-UST fabric one of the best high-contrast fabrics on the market for short throw, and it is unique at this price point.

Diffuse surface

Cellexon HomeCinema CLR-ALR is a special ALR fabric that does not reflect light from above into the viewer's eyes (unlike classic matte D (diffusely reflecting) fabrics) while simultaneously absorbing incident light from the side.

The projection light from below is collected and reflected centrally towards the viewer. It is therefore exclusively and specifically optimized for use in the ultra-short throw range and delivers breathtaking projection results even in residual light.

Impressively slim and elegant design

The extremely narrow frame, only 12 mm wide, is covered in matte black and forms only a minimal height above the fabric surface. This eliminates any reflection at the edges and creates the impression of a large 100" or 120" television.

The CLR HomeCinema UST framed screen blends perfectly into the existing room without drawing attention. Whether home cinema, conference rooms, or meeting rooms, this screen not only draws attention and replaces the television with special fabric or high-quality workmanship, but also with its slim design.

Eliminates distracting influences

Ambient light and diffuse light are known problems for projection systems, as colors disappear and blacks become weaker.

Therefore, the choice of the optimal place for your screen in the room is usually limited. Thanks to the special coating and the high-contrast surface, however, this screen is better suited for this than other products.

“Ambient light” is a term used to describe surrounding or ambient light. Screens that are equipped with a special coating to prevent this effect are abbreviated as ALR for "Ambient light rejects".

Optimized for ultra-short projection distance

This surface finish offers lower black levels, higher image contrast, better color saturation, and better image brightness from the viewer's perspective, regardless of whether the ambient light is on or off or whether residual light (daylight) is present in the room.

When using an ultra-short throw projector, it is absolutely necessary to use the flattest projection surface. Classic roller screens are generally not suitable for such a projection, as their fabrics hang freely in the room and can therefore easily move, or they have typical minimum waves in the fabrics or towards the edges. Therefore, celexon has developed a framed screen with permanently balanced tension.

Due to the extremely wide projection angle, UST projection does not forgive flatness irregularities, so framed screens are the optimal screen for UST projectors due to the constant tension of the fabric and thus the ideal flatness.

Easy installation

The fabric is tensioned with springs on the rear frame and is always perfectly flat. Thanks to the simple plug-in system, the frame is easy to mount.

The package includes all mounting accessories as well as an easy-to-understand user manual.