celexon electric laser TV pull-out, white

When setting up your laser TV on a piece of furniture, you will quickly encounter the problem of how to achieve the correct distance for your projector without having to modify the furniture or requiring a large cabinet depth. In the worst-case scenario, you may have to consider new furniture.

This problem is a thing of the past with celexon's fully electronic laser TV pull-out!

You have the choice - available in black or white

What points are important to achieve an optimal and as fully automated as possible laser TV experience?

1) Existing furniture + screen mounting and projector position

With a floor-rising screen from celexon's HomeCinema Plus series, mounting the screen on your furniture or the wall behind it is no problem thanks to the intelligent mounting brackets with finely adjustable tilt. 

The correct distance of your projector is optimally achieved with our robust laser TV pull-out. It safely carries loads of up to 20 kg and can be easily screwed to the back of your furniture using the included mounting brackets or alternatively securely mounted from above on your furniture surface to prevent the projector from tipping over with the platform. In the case of mounting from above, the mounting brackets do not need to be installed.

The end positions (front and, if necessary, rear) can be easily programmed and saved using the included remote control, and the position is always driven back to millimeter-precisely.

2) Perfect, permanent image alignment 

A very important point, in addition to the programmed and reliably driven end position, is the stability of the pull-out and its mounting on your furniture.

So that your once aligned image always appears perfectly and permanently on your screen, the internal mechanics and electronics of the laser TV pull-out play a very large role.

The construction can suddenly tilt downwards after a few trips, or the end position cannot be driven 100% exactly because, for example, simple drawer slides or built-in, rarely backlash-free drive screws allow play to the left and right or front and back.

For this reason, the celexon laser TV pull-out is equipped with high-quality and extremely robust linear guides of industrial quality. This ensures a permanent and maximally exact end position, even after many years of regular use. A “drifting” of the end position to the left or right is absolutely ruled out.

Maximally exact and permanent positioning of your laser TV

For the permanently perfect front end position, we have decided on the use of a linear rack in the drive. This is driven directly by a sturdy all-metal gear, which is manufactured true to size for the rack. Both the linear guides and the rack and gear are manufactured and mounted in industrial quality absolutely free of play.
In this way, the entire drive is absolutely free of play in its end positions on both the Y and X axes, permanently.
Even many thousands of trips, as expected with a TV replacement with a laser TV, do not lead to any play in the perfect image alignment of your projector on celexon's laser TV pull-out.

All drive components in industrial quality 

3) Space-saving and sensible connectivity

On the furniture there is usually little space, and the integration of all components must be as space-saving as possible.

Our laser TV pull-out is dimensioned at 62 cm x 39.5 cm with a height of 5.7 cm so that it fits on many pieces of furniture and accommodates almost all UST projectors on their underside feet. This way, it remains unobtrusive under your projector and can be easily used or retrofitted on almost any piece of furniture.

The highlight: all connections (power and trigger) fit within these dimensions! This means that rear connections do not add extra bulk and enable a space-saving integration into your furniture.
Likewise, no external power supply is needed to power our laser TV pull-out; a classic appliance cable is used and can be very easily replaced by you with one of the appropriate length for your furniture if necessary.
This makes it easy to lay the cables, leaving more space and less heat behind your furniture.

Rear-mounted connections save important space

4) Simple automation for the ultimate laser TV experience

celexon's laser TV pull-out is equipped with a sync trigger module.
Therefore, no 2nd trigger output or USB port on your projector is needed to automate both a screen and a pull-out.
The platform is connected via the included trigger cable to a USB port on your projector and additionally offers a trigger output for your screen. 
smart ideas for the bigger picture.

5) Service life & noise level

No one wants to have to buy a 2nd laser TV pull-out at some point. For this reason, our pull-out is made entirely of metal in all relevant components, from the housing to the drive parts, guides, and gears.
A high-torque and extremely quiet AC motor moves the pull-out safely and permanently with precision back and forth; no simple DC motor with an external power supply was installed here!

The pull-out operates whisper-quiet and drives extremely smoothly for undisturbed TV enjoyment.

The pull-out is available in black or white and can thus be chosen to match a wide variety of furniture or the color of your projector and integrated unobtrusively.

The cubist shape also allows for the pull-out to be covered or built into your furniture, enabling a maximally unobtrusive design solution for a breathtaking laser TV experience.

SHORT INFORMATION

• sturdy construction suitable for all UST projectors
• extremely smooth operation and accuracy
• whisper-quiet drive and mechanics
• linear guides and linear rack drive for permanently exact end position
• digital motor control and smart end positions programmable via remote control
• sync trigger for screen and pull-out only occupies one USB port on your projector - full automation of your laser TV
• mounting possible on the rear using the included brackets or from above on the furniture>
• incl. wireless remote control + control on the pull-out itself 
• available in black or white
• Dimensions: 620 x 395 x 57 mm

SCOPE OF DELIVERY

• Laser TV pull-out
• Wireless remote control
• 2 mounting brackets + screws for mounting on the pull-out
• Trigger cable (with USB plug)
• Appliance cable, 2 m
• Screws and wall plugs for optional wall mounting
• Padded on the underside with foam to prevent scratches on furniture, plus self-adhesive foam to secure your projector against slipping or to protect furniture