celexon Motorised Screen Professional Plus 160 x 120 cm (79" 4:3) for Presentations and Education

celexon Motorised Screen Professional Plus – permanently installed, invisible in everyday life

The Motor Professional Plus is a permanently installable motorised screen (electric screen) with a 160 × 120 cm viewable area (79", 4:3) for classic projectors with a normal throw distance. It is suitable for classic presentations and education when the projection surface should only be visible when needed: via remote control or wall push-button, the matte white fabric extends quietly from the closed housing and provides a flat, neutral image surface. The housing is powder-coated in elegant white.

Key benefits at a glance

• Fine, 4K-ready Pro series fabric for a sharp, neutral image
• Opaque black back to prevent show-through from behind
• Sturdy housing with metal end caps for regular use
• Pleasantly quiet motor for comfortable extending and retracting
• Ready to connect: wall control box and IR remote control included

Is this screen the right choice?

• Yes, if you are looking for a permanently installed motorised screen for conventional projectors (presentations, training, home cinema).
• Yes, if you want the screen to disappear into its housing when not in use.
• A deliberate choice if your projector outputs 4:3 or you specifically want this image shape; with a pure 16:9 projector, a white strip would otherwise remain unused at the top and bottom.
• Not ideal if you use a laser TV or ultra short throw projector – for these you need a laser TV/CLR screen.
• Not ideal if very large viewing areas or consistently maximum flatness requirements are the priority (e.g. a large home cinema, professional continuous use) – in that case a tensioned screen with a lateral tensioning system ensures permanently and significantly better flatness, without waves.

Do you have questions or need help choosing? Our projector specialists will advise you personally and find the right screen with you. Get in touch →

Picture quality: fine 4K fabric for a clear, neutral image

The matte white Pro series fabric, a three-layer, coated projection fabric with woven core and gain 1.2, reproduces colours neutrally and, with a sufficiently bright projector, delivers a sharp, bright image. How punchy it looks with the lights on depends mainly on projector brightness and how well the room is darkened, as projector light and ambient light compete on the surface; this fabric cannot actively suppress ambient light either. The black, opaque back prevents light shining through from behind and keeps the image clean. The black masking border frames the image. The stable woven core ensures that the fabric hangs particularly flat: a calm image without distracting waves.

Where there is a lot of ambient light, ambient light rejecting screens (ALR) get more out of the image and deliver deeper black levels.

Will the screen fit your room? Dimensions and planning

Important before you buy: a screen needs more space than just the image width. The key details at a glance:

With this 4:3 format the black top drop is minimal (around 4 cm), so you can position the image height flexibly. Always extend the fabric fully if possible: its own weight pulls the surface flat and prevents waves. Plan the power socket on the specified connection side.

As a rule of thumb, a comfortable seating distance in a home cinema for an image width of 160 cm is around 2.5 to 3 metres. In conference and training rooms, what matters most is that even the back row can read along comfortably – as a rough guide, the furthest seat should be no more than six times the image height away (here around 7.2 m). Our tip: mark out the dimensions on the wall with masking tape beforehand and you will see straight away whether the image size, image height and housing suit your room.

The screen is mounted on the wall or ceiling, hung via eyelets or firmly screwed in place (screws and wall plugs not included, as they depend on the surface); we recommend two people for installation. If the wall area is not clear – for example because of a shelf, a windowsill, a whiteboard or a TV – a matching celexon wall spacer from the Professional series creates the necessary distance from the wall. No power socket at the installation site? Then our battery-powered screens are the wireless alternative.

Exactly where does the projector need to be positioned so that the image hits the screen precisely? That depends on many factors and is the trickiest question for many people. Tell us which projector you have – we will plan the placement with you. Have your projector placement calculated →

Operation and control: included or optional?

An infrared remote control and a wall control box are included. If you want to control the screen wirelessly without line of sight, or have it lower automatically with the projector, add the matching celexon accessories:

In short: a simple infrared remote control and the wall control box are included as standard – you can add radio control and automation later if required.

Applications

Presentations, conferences & training: The screen fabric is certified to fire rating B1 (certificate), so the Professional Plus is also suitable for commercial and public spaces; the wall control box allows fixed control buttons in conference or training rooms.

Home cinema & living room: a neutral, clean image for film and series nights that only appears when you need it.

Format tip: If film and home cinema are your main focus, a 16:9 screen is usually the better choice – the black masking neatly frames the widescreen image and makes it more immersive. The 4:3 format is the right choice if you use a projector with the same format, mainly show presentation, training or document content, or want to use the image height flexibly.

How to keep your screen looking good for a long time

A motorised screen disappears back into its housing after use, protecting the fabric from dust, touch and direct sunlight. For lasting flatness, fully extend and retract the screen once at regular intervals and do not install it in a permanently warm environment – the PVC surface is sensitive to temperature.

A common idea: because the fabric is opaque, the screen should go directly in front of a window – as a blackout or for design reasons. In direct sunlight, however, the fabric heats up there and may warp. It is therefore better not to place the screen directly in front of a sunlit window.

Clean only with a dry or slightly damp soft cloth, never with alcohol or cleaning agents.

In the box

• celexon Motorised Screen Professional Plus 160 x 120 cm
• Wall control box
• Infrared remote control
• Mounting brackets and screws for wall mounting (check the wall structure beforehand)

Shipping note: your screen is usually delivered separately by courier or – for large formats – by freight forwarder.

Have you thought of everything?

• Matching projector: business projectors or home cinema projectors
• Projector hidden too: With a projector ceiling lift, the projector also disappears into the ceiling – with a 2-channel radio set, screen and lift lower together.
• Create distance from the wall: the celexon wall spacer for the Professional series, if the wall surface is not clear.
• No power socket at the mounting location: battery-powered screens
• Different size or version? You will find all versions of this series in the overview of celexon motorised screens and the complete screen range under celexon screens.

Frequently asked questions about the celexon Motor Professional Plus

Does the Professional Plus work with a laser TV or ultra short throw projector?
No. This matte white motorised screen is designed for conventional projectors with a normal throw distance. Laser TVs and UST projectors project from below at a very steep angle; for these you need special laser TV or CLR screens with a matching microstructure.

Can I control the screen with a remote control?
Yes. An infrared remote control and a wall control box are included; the IR remote needs line of sight to the screen. For radio control without line of sight (even through walls), add the matching Professional Funkset; if you also want the screen to extend automatically when the projector is switched on, combine it with the Professional Funktrigger.

Is the screen suitable for bright rooms?
In darkened and normally lit living and meeting rooms, it delivers a very good image. In brighter rooms, what matters most is a sufficiently bright projector – a powerful daylight projector holds its own there too. Only in constant bright sunlight do ALR/contrast screens play to their strengths.

Can the screen stay extended permanently?
Occasional extended use is fine. If the surface is to remain permanently visible, a fixed-frame screen is the right solution; if maximum flatness for large formats matters, a tensioned screen.

Can I mount the screen on the ceiling?
Yes, wall and ceiling mounting are both possible. If you want it to disappear flush with the ceiling, there is an otherwise identical recessed version in the same size for installation in the ceiling.

Can I use the motorised screen in the garden or outdoors?
No. A motorised screen is permanently installed, needs a power connection and is not weatherproof – it belongs indoors. There are better solutions for outdoor use: a weatherproof, inflatable outdoor screen such as the celexon INF Professional or a portable screen that you set up and take down. If you want flexibility without a permanent installation, you can also hang up a pull-down screen with eyelet mounting or use a battery-powered screen – you simply take either down again after use and bring it in out of the wet.

Planning a complete home cinema or presentation room – with projector, screen, mount and control? Our experts will put together the right complete system for you. Get expert advice →