Optoma ZK1000 8,500 Lumens 4K Laser Projector with HDBaseT and 360° Operation

Optoma ZK1000 – 4K UHD+ laser for large-venue permanent installation, signage and events

The Optoma ZK1000 delivers 8,500 ANSI lumens in 4K UHD+ (3,840 × 2,400) from a maintenance-free laser unit with a life of 30,000 hours and is aimed at AV integrators for large-venue permanent installations, digital signage and event projection. It is supplied body-only: you configure the appropriate interchangeable lens from the BX-CTA range separately according to the throw distance. HDBaseT, edge blending, 360° operation and the complete control protocol stack of Crestron, AMX, Extron, PJLink and Art-Net make it the basis for demanding AV integration.

Key benefits at a glance

• 8,500 ANSI lumens from a maintenance-free laser unit, 30,000 hours of life – no light source replacement throughout operation
• 4K UHD+ (3,840 × 2,400) via a 0.8" DLP chip for fine detail in maps, plans and large-format signage content
• Interchangeable lens system (body-only): ten BX-CTA lenses cover a TR of 0.34:1 to 8.64:1 – one housing for almost any throw distance
• HDBaseT input: video, control and network over a single Cat6a cable, up to 70 m at Full HD
• Edge blending and geometric correction with up to 17 × 17 grid points for seamless multi-projector surfaces and curved projections directly on the unit
• 24/7 rating, IP5X dust protection of the optical unit and wall colour compensation for continuous operation even on non-white surfaces

Is the Optoma ZK1000 the right choice?

• Yes, for large-venue permanent installations with varying throw distances, image widths up to 500", 4K UHD+ requirements and control via HDBaseT, Crestron or Art-Net.
• Not ideal, if you need to illuminate very large or brightly lit surfaces with well over 10,000 lumens – in that case, the brighter models in the Optoma ZU series are the way to go.
• Not suitable, if you are looking for a ready-to-install unit with a fixed lens and integrated sound – in that case, a model from our category installation projectors.

Unsure about room geometry or image width? Get in touch →

Applications: what the Optoma ZK1000 is ideal for

Digital signage and permanent installation: 24/7 rating and the long-life laser unit make the ZK1000 a low-maintenance basis for information displays, museums and brand experiences. Scheduled on/off plans run without staff on site, and wall colour compensation allows projection onto tinted or textured surfaces too.

Rental, events and immersive projection: With edge blending and geometric correction using up to 17 × 17 grid points, you can combine several units into one continuous large or wrap-around surface. 360° operation allows any mounting position, from floor projection to overhead mounting. Full 3D playback is available for immersive productions.

Large venues and corporate applications: 8,500 ANSI lumens keep the 4K image legible in lecture halls, auditoriums and atriums even with ambient light. Via HDBaseT and LAN, it integrates fully into existing room and media control systems.

Picture quality

Using the XPR pixel-shift method, the ZK1000 builds the image in 4K UHD+ (3,840 × 2,400) from the 0.8" DLP chip – for sharp edges in text, CAD drawings and large-format signage content. The dynamic contrast of 4,000,000:1 and HDR support provide depth in high-contrast content. As a reflective DLP unit, the projector delivers high in-picture contrast with ambient light, so text and graphics remain clearly defined even in rooms that are not darkened.

Connections at a glance:

HDMI 2.0 – 2× input (+ 1× loop output)

Two inputs for sources such as media players, PCs or signal processors; the HDMI loop output passes the signal on to a second projector (daisy chain).

DisplayPort (4K) 1×

Direct connection of PC/media servers with DisplayPort output for 4K playback.

HDBaseT 1× input

Video, control and network over a single Cat6a cable – up to 70 m at Full HD, shorter at 4K depending on the transmitter. Makes HDMI extenders unnecessary for remote mounting.

USB Type A 1× (5 V / 2 A)

Power supply for a plugged-in HDMI source; power-hungry devices need their own power supply unit.

LAN (RJ-45)

Network control via web interface, PJLink Class 2, Crestron, AMX, Extron, Telnet and Art-Net; firmware updates, remote power-on and status monitoring via the building network.

RS-232

Serial control of power on/off, picture mode, input selection, focus/zoom, lens shift and keystone correction for media control systems without an IP connection.

3D sync

Connection for synchronising full 3D playback.

A Wi-Fi module is not integrated; if required, the projector can be connected to the wireless network via an optional module.

Light source and operation

With no light source replacement and no filter interval, running costs remain predictable throughout the entire installation period.

Mounting and installation

The ZK1000 supports table placement, upside-down ceiling mounting, front and rear projection and, thanks to 360° approval, runs in any mounting position. As a body-only unit, the chosen interchangeable lens determines the throw distance. Align the mount with the centre axis of the screen; digital 4-corner and keystone correction are available for any remaining deviations.

The ceiling mount attaches to the four M6 threads (hole pattern 170 × 140 mm, 16 mm screw-in depth). Keep a ventilation clearance of at least 1,000 mm at the sides and add a few centimetres for plugs and cable exits to the housing depth of 39.6 cm. Kensington lock and PIN lock protect the unit against unauthorised use.

The Optoma ZK1000 measures 535 × 189 × 396 mm (W × H × D) and weighs 16.8 kg.

In the box

• Optoma ZK1000 (body-only, without lens – interchangeable lens configurable separately)
• Illuminated, wired PRO AV remote control
• Mains cable (3 m)
• Quick start guide

Optoma ZK1000 vs. Panasonic PT-REQ80LB vs. Epson EB-PU1008W – which installation laser is right for you?

If you are looking for 4K UHD+ with long laser life and Art-Net connectivity for signage and events, the ZK1000 is the right choice; the Panasonic is the 4K DLP alternative, and the Epson is the bright-white 3LCD option if WUXGA rather than 4K is sufficient.

Have you thought of everything?

• Lens: The ZK1000 is supplied without a lens. Choose the appropriate BX-CTA interchangeable lens according to the throw distance; we will be happy to advise you on choosing a lens: Request a configuration →
• Screen: For permanent installations, a fixed-frame screen for maximum flatness; for flexible set-ups, a motorised screen.
• Mount: For ceiling installation, plan for a suitable Ceiling mount or, for concealed installation, a projector ceiling lift.
• HDBaseT transmission: For remote mounting, the PureLink 4K HDMI HDBaseT Transmitter with PoH: up to 40 m at 4K, up to 70 m at Full HD over Cat6a.
• HDMI cable: No HDMI cable included. Choose an HDMI cable in Ultra High Speed quality; from 7–10 m cable length, use optical HDMI for a stable 4K signal.
• Wireless presentation: For BYOD content without native casting, see the suitable systems in our category Wireless presentation.
• Sound: The ZK1000 has no built-in speaker, so plan the sound separately: the celexon active speaker set for basic sound, and the higher-quality Kindermann FleX series for conference and training rooms.

Frequently asked questions about the Optoma ZK1000

Which lens do I need for my room?
That depends on the throw distance and desired image width – the ten BX-CTA lenses cover a TR of 0.34:1 to 8.64:1. Tell us your room depth and image size and we will configure the right lens: Request lens advice →

Can the ZK1000 be integrated into an existing Crestron or Extron control system?
Yes. Via LAN and HDBaseT, you can integrate it into your media control system using PJLink Class 2, Crestron, AMX, Extron, Telnet and Art-Net – details on network connectivity can be found in the "Connections" section.

Are 8,500 lumens enough for very large or brightly lit surfaces?
For lecture halls, atriums and signage with ambient light, yes. If you need to illuminate very wide surfaces or daylight environments with significantly more headroom, take a look at the brighter models in the Optoma ZU series.

Conclusion

The Optoma ZK1000 combines 8,500 ANSI lumens of laser power with 4K UHD+ display, an open interchangeable lens system from 0.34:1 to 8.64:1 and a connectivity package ranging from PJLink control to Crestron and Art-Net integration. The long laser life, 24/7 rating and IP5X dust protection keep operating and maintenance costs low over the service life. Edge blending and 360° freedom open up multi-projector and wrap-around set-ups.

From single unit to complete system: we plan your turnkey projector solution including the right lens, mount, signal path and control. Request your individual package offer from our projector experts now →