Panasonic PT-MZ11KLWE 11,000-lumen WUXGA laser projector with interchangeable lens, white

Panasonic PT-MZ11KLWE – 11,000 ISO lumen WUXGA projector for auditoriums, conference halls and museums

The Panasonic PT-MZ11KLWE delivers 11,000 ISO lumens in WUXGA resolution (1,920 × 1,200) from a maintenance-free laser light source with a 20,000-hour service life and is aimed at system integrators for conference halls, lecture theatres and large meeting rooms. With an interchangeable lens system, HDBaseT/Digital Link over 100 m, full control protocol support (PJLink, Crestron, AMX, Extron) and portrait and 360° installation, it covers flexible permanent installations. The white housing blends discreetly into bright meeting rooms, classic conference hotels and white-painted ceilings.

Key benefits at a glance

• 11,000 ISO lumens from a 3LCD engine — clearly legible even in auditoriums with daylight and large image sizes over 200 inches
• Maintenance-free laser light source with a 20,000-hour service life — predictable use for over seven years at 8 hours of daily operation
• Interchangeable lens system with motorised lens shift — from ultra short throw to telephoto, the optics can be adapted to the installation site
• Full control protocol support: PJLink, Crestron Integration, AMX, Extron and RS-232 — direct integration into any media control system
• HDBaseT and Panasonic Digital Link transmit video, audio and control over one Cat-6a cable up to 100 m — one line from the control room to the ceiling
• Portrait mode and 360° installation — vertical projection in museums, tilted and upside-down mounting in theatres and on stages

Applications: what the Panasonic PT-MZ11KLWE is ideal for

Auditoriums and lecture theatres. 11,000 ISO lumens keep lectures, charts and live recordings legible even with full hall lighting. WUXGA (1,920 × 1,200) shows 16:10 slides from PowerPoint and Keynote edge to edge, leaving extra room for side captions. HDBaseT carries the signal from the control room to the projector position over a single cable; PJLink and Crestron integrate the projector into the central hall control system.

Conference halls and large meeting rooms. For image sizes from around 150 inches with the room lights on, the lumen window is just right; with the interchangeable lens system, the optics can be adapted to the depth of the room — short throw for shallow rooms, standard lens for classic conference halls, telephoto lens for deep halls with a fixed ceiling position. Status monitoring via LAN and Multi Monitoring & Control keep the IT department in control of maintenance planning.

Museums and exhibitions. Portrait mode and 360° installation open up portrait projections onto steles, columns and angled wall surfaces. The white housing blends into light ceilings and classic conference architecture. 20,000 hours of laser running time cover permanent installations lasting several years; Scheduled On/Off switches the projector automatically according to opening hours.

Theatres, event stages and houses of worship. 360° installation allows any mounting axis; edge blending via Geometric Manager Pro (software licence sold separately) combines several PT-MZ11KLWE units into one continuous video wall. The genlock input synchronises multiple projectors in show setups, and the white housing suits stages with light set designs and conference setups.

Image quality: 11,000 ISO lumens, 3LCD engine and 3,000,000:1 dynamic contrast

The 3LCD engine with 1.0-inch panels delivers uniform colour — colour light output matches the ISO lumen brightness, so colour and white brightness are at the same level. Text, diagrams and logos look sharp, skin tones and brand colours true to life. The dynamic contrast of 3,000,000:1 is achieved via laser modulation and gives darker image areas a three-dimensional depth. Panasonic Daylight View measures ambient light and adjusts contrast and colour saturation to the room brightness — relevant for auditoriums with large window fronts.

Connections

Connections at a glance:

HDMI 2.0 – 2× (HDCP 2.3)

Two parallel sources — such as the control room player and the presenter's notebook — remain permanently connected. HDCP 2.3 covers protected content from streaming and Blu-ray sources.

DVI-D 1×

Digital input for classic media servers and CAD workstations with DVI output.

SDI (slot-in) 1×

3G-SDI input for broadcast workflows and live cameras from control racks.

HDBaseT / Digital Link (RJ-45)

Video, audio and control over a single Cat-6a cable up to 100 m. Panasonic Digital Link is HDBaseT-compatible and reduces cabling from the control room to the ceiling to one line.

Genlock BNC in/out

Synchronises multiple projectors for multi-screen shows and stereoscopic 3D installations.

USB Type A – 1× (5 V / 2 A)

Power supply for casting receivers and service port for firmware updates via USB stick.

LAN (RJ-45)

Web interface and media control via PJLink, Crestron, AMX and Extron. Multi Monitoring & Control monitors multiple Panasonic projectors centrally.

RS-232

Serial control with a documented command set for power, input selection, brightness, freeze and status monitoring — the classic interface for media control racks.

Security

PIN lock and password protection secure the projector in publicly accessible spaces such as foyers and museums.

Light source and operation

Filter and laser lifetimes run in sync at 20,000 hours — the PT-MZ11KLWE is designed for years of permanent installation without scheduled servicing.

Mounting and installation

The PT-MZ11KLWE is supplied without a lens (body only). From the Panasonic interchangeable lens portfolio, the integrator chooses to suit the room depth: ultra short throw optics for shallow stage rooms, standard zoom for conference halls, telephoto optics for deep auditoriums and anamorphic optics for CinemaScope projections in showrooms. Motorised lens shift, zoom range and throw ratio depend on the lens.

Weighing 22.5 kg and measuring 650 × 211 × 440 mm, the projector suits sturdy ceiling suspensions and professional wall arms. 360° installation allows any mounting axis (upside down, sideways, tilted); portrait mode activates 90° rotation for portrait projection onto steles and vertical columns. Geometric Manager Pro (software licence sold separately) adds multi-projector image blending as well as warping for curved screens and domes — the feature set ranges from edge blending and colour matching to dome correction.

Using the integrated test patterns, integrators can check geometry, focus and colour matching without an external source. Lens Memory stores zoom, focus and shift positions — when switching between 16:10 slides and 16:9 video or between several screens, the optics return at the push of a button. The Instant Off function allows direct disconnection from the mains without a cool-down period, ideal for centrally switched installations.

In the box

• Panasonic PT-MZ11KLWE (body only, without lens)
• Remote control with batteries
• Power cable

Panasonic PT-MZ11KLWE vs. PT-MZ14KLWE vs. PT-MZ17KLWE — which installation projector suits you?

Within the MZ Series, the three siblings differ purely in brightness; technology, resolution, light source, interchangeable lens system, control protocols and form factor are identical. The PT-MZ11KLWE is the right choice for halls up to around 200 inches image size with moderate daylight. The PT-MZ14KLWE delivers 27 per cent more brightness for brighter auditoriums and image sizes beyond 250 inches. The PT-MZ17KLWE is the top model in the series for very large halls and event stages with strong ambient light.

Panasonic PT-MZ11KLWE vs. Epson EB-PU2010W vs. Epson EB-PU2113W — which installation projector suits you?

The Panasonic PT-MZ11KLWE sits right between the Epson EB-PU2010W (10,000 lumens, fixed lens) and the Epson EB-PU2113W (13,000 lumens, interchangeable lens). If you are looking for a compact 10,000-lumen model with fixed optics and low weight, go for the Epson EB-PU2010W. If you need more brightness for very large auditoriums, choose the Epson EB-PU2113W. The Panasonic scores with the widest control protocol support in its class (PJLink, Crestron, AMX, Extron) and the Panasonic Digital Link interface for integration into existing Panasonic installation infrastructures.

Note on colour variant: The PT-MZ11KLWE is supplied in a white housing. An identical black variant (PT-MZ11KLBE, SKU 1000028110) is available in our shop — if required, match the colour to your ceiling, mount and media control.

Have you thought of everything?

• Interchangeable lens from the Panasonic portfolio to suit the room depth — body only, the lens is ordered separately; our specialist advisers will select the right optics together with you
• Professional screen in the right size and format — for conference halls and auditoriums, a matte white screen with gain 1.0; for bright rooms, a daylight screen
• Professional ceiling mount for a projector weight of 22.5 kg — see ceiling mounts
• HDBaseT and HDMI cabling — as the transmitter counterpart for the AV rack, we recommend the PureLink 4K HDMI HDBaseT transmitter with PoH; Cat-6a cables cover the HDBaseT run up to 100 m. In addition, High Speed HDMI cables — overview in the HDMI cables category
• External sound — the projector has no built-in speaker; suitable active speakers and soundbars in the audio category
• Wireless presentation — a BYOD receiver at the HDMI input for wireless presentation: from receivers for standard conferencing to base stations for pro AV setups with several parallel sources

Conclusion

The Panasonic PT-MZ11KLWE is a WUXGA installation laser projector for demanding B2B permanent installations: 11,000 ISO lumens, interchangeable lens system, full control protocol support (PJLink, Crestron, AMX, Extron) and HDBaseT/Digital Link up to 100 m cover auditoriums, conference halls, museums and event stages. 20,000 hours of maintenance-free laser running time make operating costs predictable. For a tailor-made configuration of projector, interchangeable lens, mount, cabling and media control, our specialist advisers are happy to help by phone, WhatsApp or email — Request a complete solution.