celexon CAT 6A Patch Cable S/FTP 7.5m, white

The celexon CAT 6A Patch Cable - S/FTP transmits network signals at speeds of up to 10 gigabits per second at an operating frequency of up to 500 MHz. This enables not only use in the classic TCP/IP range, but also the use of IP streaming and HDBaseT infrastructures.

The common standards for home network infrastructure are CAT 5 and 6. In the professional sector, standards 7 and 8 also have applications.
For the CAT 6A specification, the contact geometry in the RJ45 connectors has been optimized. This achieves the maximum transmission rate and speed. The transmission speeds of standards 7 and 8 cannot be achieved with an RJ45 connector. 

CAT 5: CAT 5 patch cables are still very common in private applications. In professional areas, they are increasingly being replaced by higher standards. With a frequency of up to 100 MHz, data rates of 1 Gbps are transmitted. Especially in domestic areas, these transmission parameters are usually more than sufficient for connecting routers, computers, and other devices.
CAT 6: With CAT 6(A) patch cables, data rates of up to 10 Gbps are transmitted at a frequency of up to 500 MHz. This standard is now used in all areas and is currently the most widely used standard in this field. For new installations, it is recommended to opt directly for this standard, as the cables are better protected against external influences compared to CAT 5 cables. 
CAT 7: Patch cables with the CAT 7 standard can only transmit data rates of up to 10 Gbps at a frequency of up to 1,000 MHz with a GG45 connector. The classic RJ45 connector cannot fully utilize this bandwidth. Since the peripherals are not widely available and are very expensive by comparison, the field of application here is very limited and found almost exclusively in professional installation areas.
CAT 8: Cables with the CAT 8 standard are used exclusively in professional areas such as data centers. Transmission speeds of up to 100 Gbps are achieved at 2,000 MHz - but only over distances shorter than 30 m. For many “normal” areas, the cost-benefit ratio is not balanced. 

The S/FTP (Screened Foiled Twisted Pair) specification describes the shielding construction of these patch cables. 
The wire pairs are each shielded with foil. In addition, all 4 wire pairs are shielded together again with a wire mesh - this corresponds to the standard according to ISO / IEC 11801 Ed 2.2. Thus, the cables are excellently protected against disturbing external electromagnetic fields. 

S/FTP (Screened Foiled Twisted Pair) 
S= Screened - braided shield
F = Foiled - foil shield
TP = Twisted Pair - twisted pair wires

The LSZH cable jacket (Low Smoke Zero Halogen) of the celexon CAT 6A patch cable consists of thermo- or thermosetting molding compounds and is free from halogens. Unlike PVC cables, LSZH cables produce almost no toxic smoke gases if there is a fire, making them particularly suitable for use indoors. In public areas where network infrastructures must be installed near places with high foot traffic or laid openly, the use of LSZH cables is required by the EU. The toxic fumes from PVC when it burns pose a danger to human health.

The CAT 6A patch cables ensure high corrosion resistance and reliable transmission performance thanks to their gold-plated contacts.

SHORT INFORMATION

• RJ45 connector to RJ45 connector
• Standard: CAT.6A, wiring: TIA/EIA 568B
• Transmission mode: Ethernet, HDBaseT, AVoIP, etc.
• Transmission speed: 10 Gbps
• Bandwidth: 500 MHz
• Connector: gold-plated precision plug contacts, transparent plastic, nickel-plated housing, flexible strain relief
• Cable: high-purity copper strands (​​4x Twisted Pair - 7/0.135 BC), S/FTP shielding, AWG27, halogen-free LSZH jacket with 5.8 mm diameter
• Cable color: white
• Cable type: Round
• Cable length: 7.5 m
• REACH, RoHS compliant

SCOPE OF DELIVERY

1x celexon CAT 6A Patch Cable - S/FTP 7.5m, white