PureLink Speaker Cable OFC 2x4.00mm² (0.10mm) 30.0m, transparent, set with 8 banana plugs

2 x 4 mm² transparent speaker cable - reference class with 99.9% OFC solid copper + 8 banana plugs

With a PureLink OFC speaker cable, you can be sure that it is made of 99.99% OFC copper, has very good conductivity and transmission properties, and was manufactured in Germany according to high quality standards.

OFC copper conductors impress with their high flexibility and low resistance.

OFC - 99.9% solid copper

The main advantages of pure OFC copper cables are their excellent electrical conductivity and low resistance.

Speaker cables are often available as "pure" copper cables, although they only have a very thin layer of copper.

This applies especially to so-called copper cables "CCA" (aluminum core with thin copper coating) or "CCS copper" (steel cable with thin copper coating).

These cables have significantly worse data transmission properties than OFC copper cables!

Different cable cross-sections are available depending on requirements; if you have any questions about this, please contact our experienced specialist advisors.

As a rule: the longer the speaker cable, the greater the power loss, but this only becomes noticeable through the strength of the signal at the end of the speaker.

Since the power loss can be compensated by increasing the cable cross-section, it is advisable to use cables with different cross-sections depending on the cable length (e.g. a larger cross-section for the rear speakers in a surround installation).

This cable (4mm²) is available in the following lengths:

• 10m / 15m / 20m / 25m / 30m / 50m / 100m

To match this, banana plugs are supplied with this cable - The perfect plugs for your speaker cables

No more frayed cable ends, loose connections and audio dropouts. With the Sentivus banana plugs, you can connect your speaker cables quickly and securely to your HiFi equipment.

The high quality of the connectors guarantees excellent transmission without distortion. The spring-loaded blades ensure a secure hold and perfect contact.

Thanks to the secure screw connection (the clamping screw can be screwed in fully), even small cable diameters can be securely attached to the plug.

The cable can be attached either to the underside of the plug or to the side hole of the plug.

a) Mounting from below: unscrew the screw connection under the plug, feed the cable through the hole and tighten the clamping screw.

b) Side mounting: Feed the cable through the side hole and tighten the clamping screw.