Purelink PT-HDBT-100 4K HDMI HDBaseT Extender Set

PureTools PT-HDBT-100 4K HDMI HDBaseT Extender Set

The PT-HDBT-100 HDMI via HDBaseT Extender Set transmits HDMI signals with 4K resolution (max. 60Hz with 4:2:0) over a distance of up to 40 meters or with Full HD / 1080p resolution up to 70 meters. The set supports HDMI version 1.4 with a max. bandwidth of 10.2Gbps incl. HDCP 2.2. The system enables bidirectional transmission (Pass-Through) for IR and RS232 signals for easy control of remote devices. With the practical DIP switch on the front of the device, the RS232 mode can be easily switched between "Control" and "Update" mode. Thanks to bidirectional PoC support, only one of the two devices (Transmitter or Receiver) needs to be powered. The set also supports CEC and features a robust steel housing with mounting brackets, making it ideal for professional installations.

PureTools - High-Quality Electronic Products for Commercial Applications

The PT-HDBT-100 4K HDMI via HDBaseT Extender Set consists of a Transmitter (Tx) and Receiver (Rx) and transmits incoming HDMI signals via HDBaseT. For this, both devices are connected to each other with a conventional Cat. cable (Cat.5e / Cat.6a) over distances of up to 40 meters for 4K resolutions with max. 60Hz at 4:2:0 color subsampling or up to 70 meters for Full HD / 1080p resolutions.

The system supports bidirectional PoC (Power over Cat) power supply. This means that only one of the two devices needs to be powered using the included power supply so that the other device is also powered via the HDBaseT Cat connection. This saves power supplies and creates order, thanks to less cabling at one of the two locations.

The bidirectional forwarding (Pass-Through) of IR and RS232 signals enables the control of connected devices from the other location. Simply connect the RS232 control device (e.g. PC) or IR emitter / receiver (not included) to the Transmitter or Receiver and forward the signal to a remote location via the HDBaseT Cat connection. Both devices feature both an IR input and an IR output with two 3.5mm jacks each. This means that the connected TV device can be controlled from the source device side and at the same time the source device can be controlled from the TV device side. The system also supports CEC control data via HDMI, which is also transmitted via HDBaseT.

The practical DIP switch on the front of both devices enables the switching of the RS232 connection between "Control" and "Update" function. In the "Control" position, the RS232 connection can be traditionally used for forwarding RS232 signals. In the "Update" position, the integrated Valens chipset can be programmed via PC.

The 12V power connection of both devices is lockable with a screw closure.

• Transmission of HDMI via HDBaseT up to 40m (4K), 70m (1080p)
• Supports 10.2Gbps for resolutions up to 4K Ultra HD 30Hz
• Bidirectional PoC, Pass-Through for IR and RS232
• DIP switch for RS232 mode, CEC support
• Robust housing with mounting brackets, screwable power connection