Vision TC2 HDMITP HDMI-Over Twisted Pair

Transmits HDMI signals over up to 30 m with CAT5e cable (CAT6 50 m)

• Supports 1080p (1920 x 1080) and 3D (30Hz)
• Power supplies required on both sides

Thanks to Vision's "Techconnect Twist" products, various signals can be transmitted over long distances using a standard, unshielded CAT5e or CAT6 cable. Offered as a set with a transmitter and receiver, the "TC HDMITP" allows the use of an affordable and flexible UTP cable (unshielded cable with twisted pairs of wires) to transmit HDMI signals between a computer and a display device.

Faster installation
Installers can take advantage of the benefits in buildings that are fully equipped with network cables. If a CAT5 cable is already available, the installation is particularly fast.

Techconnect module
The transmitter looks like a normal Techconnect HDMI module on the front and allows for a clean clip-in installation. The circuit on the back of the module is full of high-tech.

HD resolution
The HDMITP supports resolutions of up to 1080p (1920 x 1080) at 60 frames per second. It also supports 3D at 30 Hz.

Cable length
For a signal with a resolution of 1920 x 1080, the CAT5e cable can be up to 30 m long. With CAT6 cables, this recommended maximum length can be extended to up to 50 m. At the usual resolution of 1280 x 800, the cable length can be greater due to the lower bandwidth required: 50 m with CAT5e cable or 60 m with CAT6 cable.

Dual power supply
Two power supplies are included – one for the transmitter and one for the receiver. The complex HDMI signal uses all four pairs of wires in the CAT5e or CAT6 cable, so it is not possible to also use the cable for power supply.

HDCP support
Version 1.2 of HDCP (High-bandwidth Digital Content Protection) is supported. HDCP authentication is a technology developed by Intel that prevents the copying of digital content during transmission via cable.

EDID
The EDID handshake is fully supported, allowing the output device to deliver the original display resolution. The transmitter has a reset button that can be pressed to retrieve information from the display device if it is replaced.

User-friendly
Compared to long HDMI cables, network cables are easier to use: they have a tighter bending radius, are thinner, easier to pull, and easy to terminate.